Car Turntable
Turns a car in place, so you drive out forwards.
Website product summary · English
Specifications
- Models
- CTX4 · CTX45 · CTX48 · CTX56 · CTX6 · CTX65
- Drive
- Electric drive
- Diameter
- 4.0–6.5 m
- Capacity
- 4,000 or 8,000 kg
- Speed
- About one turn a minute
- Recess
- 210–355 mm deep
- Slope
- Up to 1:12 (5°)
- Climate
- −10 to +50 °C
- Warranty
- As quoted
For initial planning only. This is not a fabrication drawing or an approved project specification. Confirm the selected model, dimensions and site requirements with BAYERN.
Features
- Turns a car round in a tight space
- Flush with the floor, can be driven over
- Six sizes, from 4.0 to 6.5 m
- One or two cars on the larger decks
- Push-button or remote control
- Indoors or outdoors
- Steel deck with a ribbed top, or a paver deck finished to match your driveway
Six models
“Large” means a bigger car, such as a full-size 4×4. “Paver finish, max.” is the weight of the finish you can lay on a paver-ready deck. Every model turns at about one turn a minute.
| Model | Diameter | Clear zone Ø | Cars | Capacity | Recess, steel deck | Recess, paver deck | Paver finish, max. | Motor, steel deck | Motor, paver deck |
|---|---|---|---|---|---|---|---|---|---|
| CTX4 | 4.0 m | 5.8 m | 1 | 4,000 kg | 210 mm | 305 mm | 3,300 kg | 0.37 kW | 0.75 kW |
| CTX45 | 4.5 m | 6.0 m | 1 large | 4,000 kg | 210 mm | 305 mm | 4,150 kg | 0.37 kW | 0.75 kW |
| CTX48 | 4.8 m | 6.0 m | 1 large | 4,000 kg | 210 mm | 305 mm | 4,700 kg | 0.37 kW | 0.75 kW |
| CTX56 | 5.6 m | 6.0 m | 1 large | 8,000 kg | 355 mm | 355 mm | 6,000 kg | 0.75 kW | 2 × 0.75 kW |
| CTX6 | 6.0 m | 7.2 m | 2 | 8,000 kg | 355 mm | 355 mm | 6,800 kg | 0.75 kW | 2 × 0.75 kW |
| CTX65 | 6.5 m | 7.2 m | 2 large | 8,000 kg | 355 mm | 355 mm | 8,000 kg | 0.75 kW | 2 × 0.75 kW |
Swipe sideways to see the whole table.
Deck finishes
Steel checkerplate, sandstone pavers, ceramic tiles, concrete, timber, aluminium plate, stencil concrete, polished concrete, cobblestone, exposed aggregate, asphalt or bound resin.
On site
- A recess in the slab to the depth of the model
- A drain at the bottom of the recess
- Power brought to the drive at the edge
- Concrete of 25 MPa or more; slab by your engineer
- The clear zone kept free of walls and posts
- Slope no steeper than 1:12 (5°)
Before you enquire
- The building location and whether it is new or existing.
- The intended use, required capacity and number of levels, where relevant.
- Available clear dimensions, photographs or drawings, if available.
- Access, power supply and the target project timing.
The final quotation confirms the equipment, warranty, service coverage, response arrangements and payment terms for your project.
Bayern Trading W.L.L. · info@bayern.qa
